Water Floss Maintenance Tips You Probably Didn’t Know

Do you need water floss maintenance tips?

Brushing is not enough and gargling with mouthwash just can’t do the trick, so how can you make sure that you are able to stay away from cavities, plaque, and other harmful bacteria that could be lurking in your mouth?

Well, the answer to that is simple: get to flossing. However, we do know how hard it could be to properly use a length of dental floss, so we’re offering an alternative that could make the process a whole lot more convenient.

We’re talking about none other than a really effective device called an oral irrigator, and we’re here to give you the low-down on how to use waterpik flosses to keep you safe all day!

What’s An Oral Irrigator/Water Floss?

Whereas dental floss requires you to get between the individual spaces between your teeth, which takes a lot of work and time, an oral irrigator helps you remove all the bits of food, plaque, and any other unwanted particles in them with just a simple press of a button.

Using a stream of water to flush out these harmful organisms and contents, it only takes a minute during your daily routine to keep your teeth and gums safe!

Keeping Your Water Floss Clean

Like any other hygienic routine out there, you should always make sure that the tools you use are in peak condition to ensure that they’re doing their job to its maximum. As such, allows us here at Beautisdom to guide you on how to keep your Waterpik clean, safe, and effective.

Now, keep in mind that when it comes to these devices, you have to prevent issues like these away

  • Accumulated minerals from the water tank, which can result in weakened water pressure
  • Blockage, which can shorten the lifespan of your device
  • Bacteria buildup, which can potentially harm your teeth and gums if not properly removed regularly from your water floss
  • General maintenance, to ensure that you get the most out of your purchase

With these issues, it is truly best to make sure that your water floss gets cleaned regularly, so don’t just use and abuse it!

Now, the questions we should be asking are: how often should you clean your water floss and how exactly can you properly conduct maintenance on these things?

Not to worry, because we’re here to provide you with a guide on how to do it. Just follow these steps and you can make sure that your teeth and gums are in top-notch condition in no time.

Also Read: How to Strengthen Sensitive Teeth?

How To Clean Your Water Floss?

Step I

Remove your water floss/oral irrigator’s water tank and hoses. To do this, all you have to do is take them out from its end. Now, if you have a larger model – the ones are known as countertop water flossers that have a water tank separate from the hose –, just press the tank valve found at the bottom part of your unit in order to detach it.

After that, you’ll notice that both the water pump and motor are exposed at this point, so just wipe it down gently with a clean piece of damp cloth and wait for them to dry after a few minutes.

Remember: do not soak these components in water, as this could break them.

Step II

Here’s where you will need a cleaning solution. However, not any bottle of disinfectant could be a match for your water floss, since these could cause the electrical components to short-circuit.

Instead, make a bowl of this simple, effective homemade solution: mix an equal amount of white vinegar and lukewarm water in a bowl.

It may sound a bit, well, gross, but remember that vinegar is an acid that is very effective in removing stains and gunk, all the while disinfecting them. Don’t worry: the smell of vinegar is something that can easily dissipate, too.

Step III

Remember all those parts you removed earlier, such as the hose and tank? Well, grab those and soak them in your hot water and vinegar solution for about an hour at the least. Now, make sure that they’re fully submerged in it to ensure that each and every corner is disinfected.

Step IV

After an hour or so, take everything that you’ve soaked from the solution out and rinse it with plain old tap water. You’re also going to need a small toothbrush, preferably the size used by kids, to scrub off any remaining mould or mildew within the hoses and tubing.

Do this by adding just a bit of liquid soap or liquid dishwasher to make sure that any and all remaining bacteria are killed during scrubbing. After that, use a clean, dry towel to wipe off everything you just cleaned.

Related: A Wise Guide to Using Your Waterpik

Step V

Now that you’re done disinfecting the components of your water floss, it’s time to put them back together. After doing that, refill the tank with water and an antibacterial solution (like mouthwash or hydrogen peroxide).

Then, power your system up and let the mixture run through it. Note: don’t use it to floss yet; just let the solution pour out the sink.

Step VI

Make sure that you run the water and mouthwash/hydrogen peroxide solution through all your pick attachments to make sure that each and every one of them is free from any residue. Don’t worry, because this won’t leave an icky taste once you resume using them again; it’s the opposite, in fact.

How Often Should I Clean My Waterpik?

Regularly, you have to clean and disinfect your water floss on a monthly basis. However, the more often your device is used, the more frequent you should clean it out.

If you’re a heavy user, then it is ideal that you clean it twice a month. Also, if you’re using “hard water” – the kind that has a high level of calcium and limestone buildup – it is best if you soak your hoses, tubing, and pick attachments more frequently.

So, there you have it. Keep your teeth and gums safe by keeping your water floss safe! Enjoy!

We hope you enjoyed reading our water floss maintenance tips. Feel free to share your views with us.